분석료

- 기본사용료 : 30,000원 - 부사용료 >상온시험 시편당 15,000원 >고온 및 저온시험 시편당 : 200,000원 >초저온시험(-170 ~ -60도 이내) 시편당 : 250,000원

장치용도

1. This instrument is performed tension, compression, bending and cycle test by control unit without help of PC and with help of PC. 2. This instrument is equal or exceed all ASTM, ISO, JIS, BS, DIN, KS and other international standard for testing instruments. 3. Two-column and non-backlash precision ball screw via AC servo motor direct drive are standard. 4. Frame stiffness should be 400kN/mm or more, for the inspection of materials with abrupt deformation behavior and precise test force measurement. 5. SI, Metric, English unit display both of ？Main-body and Software is standard. 6. Crosshead speed range should be 0.0005 ~ 500mm/min or higher at least for compression testing of ceramics and rubber or fiber tensile testing. 7. Automatic load calibration and auto zero adjustment is standard. 8. Ultra high speed sampling(0.4msec or higher) must be standard. 9. This testing system was registered to the ISO-9001 of the highest level standard.

주요규격

- Type : Floor type - Loading capacity : 250kN(25tonf) - Crosshead speed range : 0.5 ~ 500mm/min - Display unit : SI (mN, N, kN), kgf (gf, kgf, tf), Pound (lbf, kip) - Crosshead stroke measuring device measurement resolution : 0.001mm - Control hold time : 1 to 36,000 seconds

세부분석/특기사항

- 고온(최대320도 이내) 및 극저온(-170도 이내)의 인장, 압축 시험 - 상온 인장, 압축, 굽힘, 벤딩 및 와이어 강도 시험